Product Description The headset uses a waterproof noise canceling electret microphone designed for high noise environments, coupled with a speaker that gives excellent sound qualities. The ear defender used is a twin skinned earcup, for excellent passive attenuation. Fitted with the latest soft liquid gel ear seals which reduce the pressure point effect from extended use, also very comfortable for…
The headset uses a military specification noise canceling electret microphone designed for high noise environments, coupled with a speaker that gives excellent sound qualities.The ear defender used is a twin skinned earcup, very similar to double glazed windows. Hence the earcup cuu out more noise than rnost other single skinned defenders on the market. Fitted with the latest liquid gel…
Integral helmet with in-built headset for direct connection into the MT autogyro intercom system. High performance electronics with military specification noise canceling microphone. The helmet is built from light weight composite and is CE marked.The visor comes with a lock and a neoprene airdam cut out wind and draft, a must for winter flying.
Select options
This product has multiple variants. The options may be chosen on the product page
Integral helmet with in-built headset for direct connection into the MT autogyro intercom system. High performance electronics with military specification noise canceling microphone. The helmet is built from light weight composite and is CE marked.The visor comes with a lock and a neoprene airdam cut out wind and draft, a must for winter flying.
Select options
This product has multiple variants. The options may be chosen on the product page
MM001 Microavionics ULM intercoms Headset Self contained electronics with onboard NIMH batteries giving over 100 hours between recharge (no re-charge is needed if using a powered radio interface MM005).
This headset has been specifically designed to work in open and enclosed cockpits with specific attention to noise reduction and clear communication.The headsets are compatible with our UL100 headsets, those of the Pilot and Lynx Avionics Micro system.
UL-300. New for 2023 This headset has been specifically designed to work in open and enclosed cockpits with specific attention to noise reduction and clear communication.The headsets are compatible with our UL100 headsets, those of the Pilot and Lynx Avionics Micro system.UL-300. New for 2023
High performance electronics with user selectable Normal or Filter setting for a quieter headset. Built using a high performance low power audio amplifier, utilising surface mount components and an electronics speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
High performance electronics with user selectable Normal or Filter setting for a quieter headset. Built using a high performance low power audio amplifier, utilising surface mount components and an electronics speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
Features UL-200 Built in headset Maximum performance for open and enclosed cockpit. Including VOX. Built using a high specification low power audio amplifier, using surface mount technology, with an electronic speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
Features UL-200 Built in headset Maximum performance for open and enclosed cockpit. Including VOX. Built using a high specification low power audio amplifier, using surface mount technology, with an electronic speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
Features UL-200 Built in headset Maximum performance for open and enclosed cockpit. Including VOX. Built using a high specification low power audio amplifier, using surface mount technology, with an electronic speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
Features UL-200 Built in headset Maximum performance for open and enclosed cockpit. Including VOX. Built using a high specification low power audio amplifier, using surface mount technology, with an electronic speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
Features UL-200 Built in headset Maximum performance for open and enclosed cockpit. Including VOX. Built using a high specification low power audio amplifier, using surface mount technology, with an electronic speech processor to remove unwanted noise.
Select options
This product has multiple variants. The options may be chosen on the product page
CE marked and EN966 certified. Light weight 870gram composite GRP shell with EPS trauma liner. Extra comfort and wind protection is achieved using the rear and side neck padding. Quick release two point chin strap.
Select options
This product has multiple variants. The options may be chosen on the product page
CE marked and EN966 certified. Light weight 870gram composite GRP shell with EPS trauma liner. Extra comfort and wind protection is achieved using the rear and side neck padding. Quick release two point chin strap.
Select options
This product has multiple variants. The options may be chosen on the product page
Fully integrated headset helmet. Compatible with Flycom system.The helmet system has an integral headset.The headset consists of a set of eardefenders built into the helmet lining.The headset is terminated to a stereo jack plug that will connect to a Flycom intercom box.You can mix and match a Flycom and a MicroAvionics Flycom compatible headset.The helmet can be supplied with or…
Select options
This product has multiple variants. The options may be chosen on the product page
Typically used by instructors who move between aircraft and want to use their own headsets. The Adapter joins two MM001 microlight headsets directly to each other providing a direct intercom connection.
Not just a simple radio interface. We use the latest electronic technology to enabled us to produce an efficient powered radio interface, with very low power consumption typically only 6mA , and all the features a pilot would require.The user can change various selectable features which reconfigure radio type (i.e. from type'A pcom A20] to Type 'BB' [lcom A6]) etc,…
Select options
This product has multiple variants. The options may be chosen on the product page
Push To Talk switch with velcro mount with curly cable and bayonet connector plug. The PTT can be fastened using the velcro to the control frame of a Delta/ Flex wing or fasten to and tube etc.
This cable is used in conjunction with the MM005 Powered Radio Interface. Simply plug one end of the lead into the interface and the other end of the lead connects to the telephone. On some telephones (incl, Nokia) you will also require a MM012 'Base Adapter' to convert the plug so that it can connect to your telephone.
Used with any radio interface this converts the standard twin jack plug to a single 3.5mm 4 pole jack (used with (corn A5, A23 etc). Cannot be used with Vertex VXA radios, for these radios see product MMO I4A.
Used with any radio interface this converts the standard twin jack plug to a single 3.5mm 4 pole jack (used with Vertex VXA radios). Cannot be used with !corn AS/A23 radios, for these radios see product MM014.
Only required if you use a Vertex VXA on a Type 'B' MM005 Powered Radio Interface. Used in conjunction with a MM005 Powered Radio Interface, converts the standard Type 'B' interface radio power lead to fit the Vertex VXA radios.
CT-91A Vertex/Yaesu VXA220,300,700 standard twin plug adapter for use with type 'B' interface / paramotor headset. Requires power adapter MM014B for MM005
Used to filter electrical interference from your radio. Connect the 12 volt ignition supply to any radio interface. This small unit rated at I Amp will plug directly into the radio interface. No terminating of wires needed. This unit can be supplied with bare wire to connect to equipment other than MicroAvionics goods.
Converts a GA style headset to work with our powered radio interface (MM005).The adapter is also compatible with Lynx and Pilot Europe powered radio interfaces.
Converts a Flycom style headset to work with our powered radio interface (MM005).The adapter is also compatible with Lynx and Pilot Europe powered radio interfaces.
This adaptor will allow the connection of a MicroAvionics or Lynx Micro headset, the adaptor will allow connection toa GA intercoms system. The adapter has a user adjustable headphone volume control.
This adaptor will allow the connection of a MicroAvionics or Lynx Micro headset, the adaptor will allow conneection to a MT Gyro intercoms system. The adapter has a user adjustable headphone volume control.
This adaptor will allow the connection of a MicroAvionics or Lynx Micro headset, the adaptor will allow conneection to a MT Gyro intercoms system. The adapter has a user adjustable headphone volume control.
Tested and certified to European Airborne sports standard EN966 and carries the CE marking. A composite helmet designed to be worn over a standard microlight/ ULM headset.The outer shell is made from composites and has an EPS shock absorbent liner with a webbing strap and quick release buckle.The helmet is light weight, at only 700grams.A clear or half tint visor…
Select options
This product has multiple variants. The options may be chosen on the product page
Tested and certified to European Airborne sports standard EN966 and carries the CE marking. A composite helmet designed to be worn over a standard microlight/ ULM headset.The outer shell is made from composites and has an EPS shock absorbent liner with a webbing strap and quick release buckle.The helmet is light weight, at only 700grams.A clear or half tint visor…
Select options
This product has multiple variants. The options may be chosen on the product page
Tested and certified to European Airborne sports standard EN966 and carries the CE marking. A composite helmet designed to be worn over a standard microlight/ ULM headset.The outer shell is made from composites and has an EPS shock absorbent liner with a webbing strap and quick release buckle.The helmet is light weigh, at only 700grams.A clear or half tint visor…
Select options
This product has multiple variants. The options may be chosen on the product page
Tested and certified to European Airborne sports standard EN966 and carries the CE marking. A composite helmet designed to be worn over a standard microlight/ ULM headset.The outer shell is made from composites and has an EPS shock absorbent liner with a webbing strap and quick release buckle.The helmet is light weigh, at only 700grams.
Select options
This product has multiple variants. The options may be chosen on the product page
Jet flip type visor for direct replacement to our helmets, they will also is many other make helmets.The visor has a scratch resistant coating and a UV protective coating.
Jet flip type visor for direct replacement to our helmets, they will also fit many other makes of helmets.The visor has a SO% graduated half tint, a scratch resistant coating and a UV protective coating.
Fi. to the bottom of the helmet visor. Stops the cold wind from passing over the microphone creating clearer communication, also keeps you warmer in winter. Molded from tough ABS plastic.
Hight power strobe system. The strobe can be connected from 9 - 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output. The power consumption is less than 500mA if connected to AC volts or 2 Amp connected to DC volts.
High power strobe system. The strobe can be connected from 9 — 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output.The power consumption is less than 50OrnA if connected to AC volts or 2 Amp connected to DC volts.
High power strobe system. The strobe can be connected from 9 — 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output.The power consumption is less than 500mA if connected to AC volts or 2 Amp connected to DC volts.
Replacement strobe head. Comes with fixing kit, new connector and 6meters of cable that can be cut to any length. Can be used with other makes of 3 wire strobe systems.
Replacement strobe head. Comes with fixing kit, new connector and 6meters of cable that can be cut to any length. Can be used with other makes of 3 wire strobe systems.
Replacement High power driver box. Will power one, two or three strobes. The alternating and burst speed can be adjusted. Flash rate upto 300fpm. Input voltage 9-80 volts ac or dc. Size 80 X 60 X 50mm. The box is light weight aluminum only 200g. Can be used with other makes of 3 wire strobe heads.
Protect your helmet from damage. Quality headset/ helmet bag with rope drawstring plastic stop not and carry handle. Screen prinmd with the MicroAsionics logo
Fully specified stereo paramotor headset. Designed to be worn under a MicroAvionics CE marked safety helmet. No other UK manufacture has all these features. User can configure to work on any radio.
Select options
This product has multiple variants. The options may be chosen on the product page
Paramotor headset with side tone - Helmet mount for [cam or similar helmet Helmet mount headset for Icaro or similar helmet. PM-I00 Stereo Paramotor headset with side tone -
Auxiliary music audio in and out lead, used for conneting MP3 player into radio interface or recording device to Auxiliary audio out on radio interface. iPod not included.
Remote PPT switch. The switch fastens to your finger or risers using velcro straps fastened to the switch. The cable is curly but can be supplied in straight cable if required (at additional expense)
This lead allows the connection of two MP001 headsets which will provide a tandem intercom between pilot and passenger. Popular with tandem paramotor pilots and instructors.
